Un-terminated, 4-Port Waveguide Crossguide Couplers
Directional couplers are used to isolate, separate, and combine signals in RF signal measurement applications. A signal is passed between an input and output ports, with a smaller portion of the same...
View ArticleVGAs for LTE and WCDMA Infrastructure
These low noise, variable gain amplifiers (VGAs) are ideal for low noise/high linearity systems and LTE/WCDMA infrastructure applications. Three different models are available with frequencies as low...
View ArticleCavity Notch Filter: 1000-15000 MHz
The cavity notch filter has a center frequency of 1000-15000 MHz, maximum input power 100 watts, operating temperature range -40 °C to +85 °C and can withstand 25 G's of shock and 10 G's vibration.
View ArticlePortable Spectrum Analyzer: PSA-2500C
This spectrum analyzer is battery powered and compact, making it ideal for field engineers that don’t want to carry around a large and cumbersome bench-top unit. It covers the 5 MHz to 2,500 MHz...
View ArticleUltra Low Phase Noise OCXO
This OCXO features low power, ultra-low phase noise on the floor , a 1” x 1” package, high stability and low aging. It has a +17 dBm sine wave output and is ideal for telecommunications systems,...
View ArticleHigh Frequency Electromagnetic Software: Sonnet Professional Suite (Release 14)
Sonnet’s high frequency electromagnetic (EM) software can be used in the analysis of microwave circuit discontinuities, arbitrary microstrip and stripline circuits, planar (patch) antennas, planar...
View ArticleSwitches and Capacitors for Antenna Tuning
Antenna tuning and antenna diversity are key for smartphone manufacturers looking for analog semiconductor solutions that can handle more than 20 cellular frequency bands, as well as WiFi and...
View Article1P2T Solid State RF Switch: 50S-1832
This solid state RF switch has a 1P2T configuration and operates in the 960-1300 MHz frequency range. It has an impedance of 50 Ohms nominal, a -20oC to +70oC operating temperature range, and more.
View ArticleBacklight LED Drivers for Smartphones and Tablets
Skyworks has recently released four new backlight LED drivers designed specifically for next-generation smart phones and tablets.
View Article802.11ac Enabling Front-End-Modules
IEEE 802.11ac enables faster content downloads than 802.11n solutions have in the past. Skyworks recently developed and released two from-end-modules (FEMs) that enable 802.11ac technology for WiFi...
View ArticleUltra-Low Noise Amplifier: SKY67151-396LF
This high performance, GaAs, pHEMT low-noise amplifier (LNA) covers the 0.7-3.8 GHz frequency range and is ideal for applications involving LTE, GSM, WCDMA, HSDPA macro and micro base stations, high...
View Article180 Degree, 3-4 Port Hybrid Couplers
MCLI’s 180 Degree, 3-4 Port Lumped Element Hybrid Couplers cover the 2-2000 MHz frequency range. They feature low insertion loss, low VSWR, high temperature stability, excellent amplitude balance and...
View Article90 Degree, Lumped Element Hybrid Couplers
MCLI Hybrid couplers are four-port directional couplers designed for a 3 dB power split. These 90 degree, 10 bandwidth, lumped element hybrid couplers feature low insertion loss, low VSWR, uniform...
View Article90 Degree Hybrid Octave Couplers - Lumped Element
MCLI Hybrid couplers are four-port directional couplers designed for a 3 dB power split. They’re available in two configuration types, 90 degree (or quadrature hybrid couplers), and 180 degree hybrid...
View ArticlePulsed RF Microwave Frequency Counter/Analyzer: CNT-90XL
This RF/Microwave frequency counter/analyzer can be used to measure, analyze, and calibrate microwave frequency, power, and pulsed RF time parameters like pulse width and PRI. This system features a...
View Article180 Degree SMA Hybrid Couplers
Hybrid couplers can be used to split signals from tower top amplifiers to BTS receivers, in signal sampler applications to monitor system performance, to inject a signal into a system without...
View ArticleMultiband, Multimode Front-End Modules (FEMs) for Advanced Mobile Applications
The SKY78010 and SKY78011 are multiband, multimode front end modules (FEMs) that are fully optimized and 100% RF tested. They’re both significantly smaller than the industry’s most advanced approach...
View Article90 Degree Stripline Hybrid Couplers
MCLI’s 90 Degree Stripline Hybrid Couplers are four-port directional couplers designed for a 3 dB power split. They’re RF shielded and feature high isolation, a miniature size, low VSWR, low loss, and...
View ArticleStep-Down Regulator for Multi-Band/Mode RF Power Amplifiers: SKY87000
The SKY87000 is a step-down regulator with auto-bypass LDO for multi-band and multi-mode RF power amplifiers. It features a 2.7 to 5.5 V input voltage range, a 0.4 V to 4.25 V dynamic output voltage,...
View ArticleDielectric Loaded Cavity Bandpass Filter
The dielectric resonators used in the manufacturing of the dielectric loaded bandpass filters are manufactured from Titanate based ceramic substrates supported by an alumina post. These resonators...
View Article
More Pages to Explore .....